A bathe tray is crucial for the right bathe expertise. It retains water whilst you bathe and direct it in direction of the drain.
Moreover, it offers a sturdy non-slip base for showering.
Subsequently, not solely is it necessary to decide on the precise one, however equally necessary to put in it appropriately.
Earlier than changing your bathe, putting in a bathe tray is one thing that ought to be left for skilled fitters.
Nonetheless, if in case you have primary data and expertise utilizing plumbing instruments, it may be a enjoyable DIY challenge over a weekend.
Whether or not you might have a bathe tray with a riser equipment or with out one, this step-by-step information will assist you to full the set up efficiently.
On this information, we collaborate with the Royal Loos set up specialists to offer you in-depth directions. Since they’re specialists at crafting bathe trays within the UK
Ought to You Set up a Flat Bathe Tray or a Bathe Tray with Riser Equipment?
Earlier than we go additional, you will need to know the distinction between two main varieties of bathe trays in phrases.
| Facet | Bathe Tray with Riser Equipment | Bathe Tray with out Riser Equipment |
|---|---|---|
| Use: | Elevates the bathe tray for simple plumbing entry and higher drainage. | Put in flush with the ground, making a minimalist look. |
| Set up Complexity (DIY): | Sometimes, extra advanced for a DIYer resulting from added parts. | Simpler for a DIYer because it entails an easier set up course of. |
| Riser Equipment Parts: | Riser legs, panels, and adjustable toes. | Not relevant (no riser parts). |
| Plumbing Accessibility: | Quick access for plumbing connections as a result of raised tray. | Plumbing connections could also be more difficult resulting from restricted area. |
| Drainage: | Improved drainage as a result of raised place. | Drainage could depend upon the ground’s slope. |
| Aesthetic Concerns: | Might barely enhance the peak of the bathe space. | Creates a smooth, low-profile look. |
| Widespread Functions: | Widespread in bogs with restricted underfloor area or for retrofits. | Widespread in trendy, design-focused bogs. |
| Waterproofing: | Might require further care to make sure waterproofing round riser parts. | Sometimes, easy for the standard tray. |
| Upkeep: | Quick access for upkeep and repairs. | Might require extra in depth work for upkeep below the tray. |
No matter the kind of bathe tray you select, whether or not it’s for a quadrant bathe enclosure or every other, we’re going to talk about each bathe trays with an increase equipment and with out on this set up information.
Supplies and Instruments Wanted
You will have the next instruments and supplies for each adjustable and flat bathe trays.
- Bathe tray with or and not using a riser equipment (relying in your selection).
- Adjustable wrench
- Spirit stage
- Silicone sealant and caulk gun
- Screwdriver
- Tape measure
- Pencil
- Hacksaw (for chopping riser equipment legs if wanted)
Step-by-Step Bathe Tray with Riser Equipment Set up Course of
Should you plan to put in an adjustable bathe tray, then observe this course of.
Step 1: Put together the Space
You’ll first have to take away the outdated tray if in case you have one fitted already. Additionally it is necessary to examine the bathe space after elimination and restore any harm so that you don’t get any issues at a later time.
- Moreover, guarantee the ground is clear and stage.
- Test the drainage system for any obstructions.
Step 2: Assemble the Riser Equipment
- Comply with the producer’s directions to assemble the riser equipment.
- Alter the legs to the specified top (normally between 100-200mm).
Step 3: Place the Tray
- Place the bathe tray on high of the riser equipment.
- Use a spirit stage to make sure its stage in all instructions.
Step 4: Safe the Tray
- Find the tray’s fixing holes and mark their positions on the ground.
- Drill pilot holes for screws.
- Screw the tray down via the holes into the ground utilizing a screwdriver.
- Make certain it’s safe and stage.
Step 5: Join the Waste Outlet
- Join the waste outlet to the entice.
- Apply silicone sealant to make sure a watertight seal.
- Test for leaks by operating water via the drain.
Step-by-Step Bathe Tray with out Rise Equipment Set up Course of
In case you might have a flat bathe tray, then observe this course of.
Step 1: Put together the Space
In case you might have an outdated bathe tray then take away it first. You will need to additionally examine the world for any repairs and damages.
- Make certain the ground is clear and stage.
- Test the drainage system for any obstructions.
Step 2: Place the Tray
- Place the bathe tray within the desired location.
- Use a spirit stage to make sure its stage in all instructions.
Step 3: Safe the Tray
- Find the tray’s fixing holes and mark their positions on the ground.
- Drill pilot holes for screws.
- Screw the tray down via the holes into the ground utilizing a screwdriver.
- Make certain it’s safe and stage.
Step 4: Join the Waste Outlet
- Join the waste outlet to the entice.
- Apply silicone sealant to make sure a watertight seal.
- Test for leaks by operating water via the drain.
Closing Step: Seal the Edges
- Apply silicone sealant across the edges of the bathe tray the place it meets the partitions and flooring.
- Easy the sealant together with your finger for a neat end.
Please observe that the newly fitted bathe tray ought to be periodically checked for the sealant and reapplied as wanted to forestall water harm.
Moreover, keep in mind to purchase the bathe tray from a dependable retailer like Royal
Loos and observe the producer’s directions on your particular bathe tray and riser equipment, as they could have distinctive necessities.
Moreover, be sure that all connections are watertight and double-check your work for leaks earlier than utilizing the bathe.
Should you’re not sure about any step within the course of, seek the advice of an expert plumber or contractor for help. Security ought to all the time be a precedence when working with instruments and plumbing techniques.
